RE: [K12OSN] More ThinkNIC questions.
Stevn Bartley (stevn.bartley@ints.com)
Tue, 19 Mar 2002 06:58:46 -0800
I only have one terminal so, I don't believe the settings are working
correctly. I have tried setting them to 640x480 as well with no change.
The only terminal I have is WS001 and it is getting a login, has sound
working etc.. but the resolution will not change.
I apologize for not being more specific on the mouse issue. I have tried
all of the X_MOUSE settings I am aware of. It is currently set to
X_MOUSE_BUTTONS = 3 as the only mouse config line. I have also tried
setting config lines for X_MOUSE_RESOLUTION = 400 and X_MOUSE_PROTOCOL =
"PS/2".
None of this has worked. I have, however, been able to affect the sound on
the workstation by modifying the SNDMODULE settings in this same file so I
believe the file is being used but for some reason, is not using the
settings for mouse or resolution.
Thanks again,
Steve
-----Original Message-----
From: k12osn-admin@redhat.com [mailto:k12osn-admin@redhat.com]On Behalf
Of Julius Szelagiewicz
Sent: Tuesday, March 19, 2002 6:24 AM
To: Stevn Bartley
Cc: k12osn@redhat.com
Subject: Re: [K12OSN] More ThinkNIC questions.
Steve,
2 points: 1. please send messages inline, not as attachments, 2.
your X_MODE should work fine. if it doeasn't, you probably are changing
mode for a different terminal than the one you are looking at. 3 button
mice work fine on workstations: X_MOUSE_BUTTONS = 3, or if you are
using usb mouse: X_USBMOUSE_BUTTONS = 3
julius
On Tue, 19 Mar 2002, Stevn Bartley wrote:
> First, I would like to thank those who replied to my earlier questions. I
> was able to work with Jim McQuillan on Saturday at the K12LTSP clinic.
Jim
> was able to get the ThinkNIC setup to boot and run.
>
> I do have a couple of questions now. First, I have been unable to get the
> ThinkNIC to come up in anything other than 1024X768. I have set lts.conf
to
> X_MODE_0 = 800x600 but it still boots in 1024x768. Any pointers would
be
> appreciated.
>
> On the note of pointers, I am also using a Microsoft IntelliMouse with
> wheel. I use the same mouse on the LTSP server. On the server, the wheel
> works. On the ThinkNIC, it does not. Any ideas???
>
> Thanks again,
>
>
> ____________________________________________
> STEVN BARTLEY
> Network/System Administrator
> INTEGRATED SERVICES, INC.
>
> Phone: 503-968-8100
> Fax: 503-968-9100
> stevn.bartley@ints.com
> www.ints.com
>
_______________________________________________
K12OSN mailing list
K12OSN@redhat.com
https://listman.redhat.com/mailman/listinfo/k12osn
For more info see
_______________________________________________
K12OSN mailing list
K12OSN@redhat.com
https://listman.redhat.com/mailman/listinfo/k12osn
For more info see