Re: [K12OSN] Just getting started
Paul Nelson (pnelson@riverdale.k12.or.us)
06 Nov 2002 17:20:43 -0800
Hello Dave,
The K12LTSP.org site has most of what you're looking for. See the client
section at:
http://k12ltsp.org/clients.html
We've found that 10 clients can often be the limit for IDE drives. You
will also be taxing your memory at that number. Faster drives and more
memory go a long way.
You can use the server as a workstation just fine. Just make sure no one
turns it off or your other users will complain!
;-) Paul
On Wed, 2002-11-06 at 16:23, Dave Prentice wrote:
> Hello anybody,
> I sent this once but never saw a response. Here goes again:
> 1. I have now set up a dual PII 350mhz with 512meg RAM and 8gig hard
> drive space with K12LTSP runing RH7.3. Am I correct in understanding
> that 512meg should allow about 10 clients?
> 2. Now that the (planned) server is running fine as a standalone,
> where can I find a HOWTO describing the steps needed to configure it
> to start supporting clients? Likewise, where is a HOWTO on exactly how
> to configure each client?
> 3. Can the server be used to run X at my desk while it is supporting
> clients, or does it have to be left alone for server duty only?
> Thanks,
> Dave Prentice
> prentice@instruction.com
>
>
>
>
> _______________________________________________
> K12OSN mailing list
> K12OSN@redhat.com
> https://listman.redhat.com/mailman/listinfo/k12osn
> For more info see
--
======================================================================
Paul Nelson .............................. pnelson@riverdale.k12.or.us
Riverdale High School .................. http://hs.riverdale.k12.or.us
_______________________________________________
K12OSN mailing list
K12OSN@redhat.com
https://listman.redhat.com/mailman/listinfo/k12osn
For more info see