[K12OSN] Clients don't connect :-(
Dan Bentson-Royal (dbentson@orion.lcsd.k12.wa.us)
Mon, 29 Apr 2002 16:25:04 -0700
I have my LTSP server running but am not sure what is failing when
trying to get a client to connect. Here is as much info as I can
figure is relevant...
On the server:
During the server's booting process, the server shows dhcpd succeeds.
I can successfully ping others on my network.
I can also successfully ping 192.168.0.254
I have run:
----------
tail -f /var/log/messasges
Apr 29 14:40:23 ltsp1 xinetd[1635]: warning: can't get client
address: Transport endpoint is not connected.
-----------
There is nothing in the tail report about clients trying to connect.
On the switch:
The server cable is connected to the uplink port - no green light
When the server's cable is connected to regular port - green light!
Client cable connects to switch and has green light
I have swapped the switch with a known good switch.
I have tried a new 10/100 hub. No improvement
Just to be complete, on the client, I get these messages:
"Searching for server (DHCP)
3C90X: Status (FF)
3C90X: Tx Reclaim Error (FF)
Issuing RESET
Other info:
I have on eth0 the default gateway address set to be the IP address
of eth1 - did I do that right?
What should I try next?
_______________________________________________
K12OSN mailing list
K12OSN@redhat.com
https://listman.redhat.com/mailman/listinfo/k12osn
For more info see